IQS System

Allows 360º Video Coverage with Four Pinhole Cameras

Read more

Overview

  • Supports ATM Cameras
  • 360º Coverage Area
  • Expand Through Cascading
  • Communicates with PTZ Modules
  • On Board Storage Option
  • Compact Size
  • Low Weight
  • Low Power

The IQS is an accessory for the Visual Engineering range of cameras. It allows multiple solid state PTZ cameras to be connected together at a single point of control, allowing 360º coverage with no moving parts.

The Visual Engineering Miniature ATM allows operators to pan, tilt and zoom within it’s 3.1 megapixel field of view. IQS allows four of these cameras to be ‘stitched’ together to increase the field of view.

The IQS constantly communicates with the attached cameras, when one is about to pan outside of its available range the IQS automatically switches to the next camera in the direction of movement.

Particularly suited to vehicle fits, IQS together with ATM cameras can be concealed behind a 1.5mm aperture, covering all four sides of the vehicle, giving a 360º pan, 60º tilt and 3x magnification.

To provide greater over-lapping coverage, IQS units can be cascaded together to increase the number of available camera inputs.

To the outside world the IQS appears as a standard PTZ camera, responding to both Sony Visca and Pelco protocols over RS232 or RS485 communications standards.

It outputs analogue, composite video in either PAL or NTSC.

Input Resolution    3.1 Megapixel    Protocol PelcoD, PelcoP, Visca  

Output Video 

PAL or NTSC

Baudrate

Selectable

Sensitivity

<0.1 Lux

Comms Mode  

RS232, RS485

Resolution

>2000TVL

Power

2.5W

Zoom

3x Lossless

Environmental   

IP65

Field of View - Pan   

360º 

Weight   

200g

Field of View - Tilt

60º

Dimensions

80 x 80 x 22mm

1 x IQS Control Module

4 x ATM Camera

1 x IQS Power Comms Cable

4 x IQS ATM Interface Cable

1 x Power Supply - AC/DC 15V 1.6A

1 x USB Memory Stick 2GB